
Learning how to install RAM is a great first step into working inside your own PC. It’s one of the simplest upgrades there is: no cables to reroute, no thermal paste, nothing to unscrew except the side panel. Most people finish in fifteen minutes. The bits that trip people up are choosing compatible memory and putting it in the right slots, so we’ll spend a little time on those.
Before you buy: check what type of memory your motherboard uses (DDR4 or DDR5), how many slots it has and how much it supports. Buy a matched kit rather than mixing different sticks.
Step 1: Check what your PC supports
Every RAM upgrade starts with the motherboard. Find its model in Windows by searching for System Information and looking at “BaseBoard Product”, or use the free tool CPU-Z. Then check the manufacturer’s website for:
- Memory type: DDR4 and DDR5 aren’t interchangeable. Our guide to DDR4 vs DDR5 explains the difference.
- Number of slots: usually two or four on a desktop.
- Maximum capacity and supported speeds.
- The QVL, or qualified vendor list: memory kits the maker has tested. Buying from it isn’t essential, but it removes guesswork.
Also open Task Manager, go to Performance, then Memory, and look at “Slots used”. It tells you how many sticks are already installed.
Step 2: Choose the right memory
Knowing how to upgrade RAM properly starts with buying a matched kit, two or four sticks sold together, so they’re identical and tested as a set. Adding a different brand or speed to existing memory often works, but it can cause instability, and the whole lot will run at the speed of the slowest stick.
How much? 16GB is the minimum for a modern PC, and 32GB is the comfortable amount for gaming and multitasking. Our article Is 16GB RAM enough? goes through it in detail.
Step 3: Gather your tools and prepare
- A Phillips screwdriver for the side panel.
- A clear table with good light.
- Optionally, an anti-static wrist strap. If you don’t have one, touch a bare metal part of the case before handling parts.
Shut down the PC, switch off the power supply at the back and unplug it. Press the power button once to drain any leftover charge. Then lay the case on its side, with the motherboard facing up.
Step 4: Find the slots and the right order
The memory slots are the long, thin slots beside the processor cooler. If you’re installing two sticks on a four-slot board, they almost always go in the second and fourth slots counting from the processor, often labelled A2 and B2. That’s what puts them in dual channel, which matters for performance.
Check the motherboard manual or the labels printed on the board to confirm. Getting the slots wrong is the most common mistake when people learn how to install RAM, and it quietly costs performance.
Step 5: How to install RAM sticks in the slots
- Open the latches at the end of the slot. Some boards have latches on both ends, others on just one.
- Hold the stick by its edges and line up the notch on the bottom with the bump in the slot. It only fits one way.
- Press down firmly and evenly with your thumbs on both ends until the latches click shut. It takes more force than most people expect.
- Check the stick is fully seated, level, with no gold contacts showing.
If a stick won’t go in, stop and check the notch. Never force it the wrong way round.
Step 6: First boot (be patient)
Close the case, plug everything back in and turn it on. With new memory, especially DDR5, the first boot can take a while. The motherboard runs a process called memory training, and the screen may stay black for a minute or more. Many boards show a small “DRAM” light while this happens. Don’t turn it off. Give it a few minutes.
Step 7: Check it’s working, then enable full speed
Once Windows loads, open Task Manager, go to Performance, then Memory, and check the total matches what you installed. Next, restart into the BIOS (press Delete as it starts) and enable the memory’s XMP profile (Intel) or EXPO profile (AMD). Without it, new memory runs at a slower default speed. Save and restart.
Step 8: Test for stability
A quick test now saves headaches later. Windows has a built-in tool: search for Windows Memory Diagnostic and run it. For a more thorough check, MemTest86 runs from a USB stick and tests every bit of memory over several passes. No errors means you’re done.
If something goes wrong
- The PC won’t start or shows a DRAM light: reseat the sticks firmly. Then try one stick at a time in the slot the manual recommends for a single module.
- Windows shows less memory than you installed: one stick may not be seated, or the slot may be faulty. Reseat it, then try another slot.
- Crashes after enabling XMP or EXPO: update the BIOS, or try a slightly lower speed. Mixed kits often cause this.
- Still stuck: a BIOS update often improves memory compatibility, especially with newer DDR5 kits.
How to install RAM in a prebuilt PC
Most prebuilt desktops use standard parts, so the steps above apply. A few big-brand machines use compact cases with little room around the slots, or have only two slots that are already filled. Check the manual first. Many manufacturers allow memory upgrades, but warranty terms vary, so read them before you start and keep the original sticks in case you ever need them.
How to upgrade RAM in a laptop
Laptops are different. Many thin models have memory soldered to the board, which can’t be upgraded. Others have one or two small SO-DIMM slots under a panel on the bottom. Check the laptop’s manual or the manufacturer’s support page before you buy anything.
When a RAM upgrade isn’t the answer
More memory fixes slowdowns caused by running out of memory. It won’t speed up a PC held back by an old hard drive, an overheating processor or a weak graphics card. Check Task Manager first: if memory usage regularly sits above 85 per cent, a RAM upgrade will help. If it’s well below that, look elsewhere. Knowing how to install RAM is handy, but it’s only worth doing when memory is the real bottleneck.
If you’d rather start fresh, every system we build ships with matched memory in dual channel and its rated speed enabled. Some, like these, leave room for more later. To brush up on the basics first, our guide on what RAM does is a good place to start:
RAM upgrade questions
How long does it take to install RAM?
About fifteen minutes, plus a few minutes for the first boot with new memory.
Do I need to reinstall Windows after a RAM upgrade?
No. Windows detects the new memory automatically.
How to upgrade RAM from 16GB to 32GB?
If you have two free slots, add a matching 2 x 8GB kit. If not, replace your sticks with a 2 x 16GB kit, which usually runs more reliably than four sticks.
How to install RAM without an anti-static strap?
Touch a bare metal part of the case before you start and every so often while you work. Avoid working on carpet, and handle sticks by their edges.
Is a RAM upgrade worth it for gaming?
If you have 8GB or a single stick, absolutely. Moving to 16GB or 32GB in dual channel reduces stutter in modern games.
Can I install RAM with the PC still plugged in?
No. Always switch off and unplug the power first. Installing memory with power connected can damage the sticks or the motherboard.


